E-T Five Window™ The Low Angle center is 2 inches deep through the windows (front to back). This is necessary for narrow or shallow wheels when putting the center as far forward as possible. This gives maximum fender clearance and is usually used for front wheels. The front side setting will be minimum. The all aluminum wheel is avaliable fully polished or with a cast center and polished rim.
|
| Five Window Low Angle Specs & Pricing | |||||
| Wheel Size | Photos | Front Side Setting min - max |
Back Side Setting min - max* |
Cast Price Each |
Polished Price Each |
| 14 x 6 | 3 3/4" | 3" | $295 | $395 | |
| 15 x 4 | 3 1/8" | 1 7/8" | $300 | $400 | |
| 15 x 5 | 3 1/8" | 2 7/8" | $250 | $350 | |
| 15 x 6 | 3 1/8 to 4 1/4" | 3 7/8 to 2 3/4" | $300 | $400 | |
| 15 x 7 | 3 1/8 to 4 1/4" | 4 7/8 to 3 3/4" | $310 | $410 | |
| 15 x 8 | 3 1/8 to 5 1/4" | 6 7/8 to 3 3/4" | $310 | $410 | |
Red, bold wheels are 1-piece cast and in stock. Other wheels are 2-piece and assembled to order with a 1-2 week turnaround. Other sizes can be made, but please call to discuss application. All wheels come with lugs and stems. Prices effective March 9, 2011.
*CAUTION: Deep backside settings, more than 4", or Reversed profile 15" 2-piece wheels may not have a brake drum or caliper diameter larger than 13 1/8". See Tech Specs page.
= See wheel on vehicle. 
=See photo comparison of wheel in different sizes.
|
The High Angle center is 3 1/2" deep through the windows (front to back). The wide thicker center curves much further out giving a deeper bowl appearance. Because of its width, it can only be made in 8" or wider widths. The wider the rim the more offset variation is available. High Angle wheels come full polished to an almost chrome like finish or with a cast center and polished rim.
|
| Five Window High Angle Specs & Pricing | |||||
| Wheel Size | Photos | Front Side Setting min - max |
Back Side Setting min - max* |
Cast Price Each |
Polished Price Each |
| 15 x 8 | 5 to 5 1/2" | 3 1/2 to 4" | $300 | $400 | |
| 15 x 8 Rev. | 6 7/8" | 2" | $350 | $450 | |
| 15 x 10 | 6 1/2 to 7 1/4" | 3 3/4 to 4 1/2" | $320 | $410 | |
| 15 x 10 | 5 1/2 to 7 1/2" | 3 1/2 to 5 1/2" | $355 | $455 | |
| 15 x 12 | 5 1/2 to 9 1/2" | 3 1/2 to 7 1/2" | $375 | $475 | |
| 15 x 14 | 6 to 11" | 4 to 9" | $495 | $620 | |
| 15 x 15 | 6 to 12" | 4 to 10" | $495 | $620 | |
Red, bold wheels are 1-piece cast and in stock. Other wheels are 2-piece and assembled to order with a 1-2 week turnaround. Other sizes can be made, but please call to discuss application. All wheels come with lugs and stems. Prices effective March 9, 2011.
*CAUTION: Deep backside settings, more than 4", or Reversed profile 15" 2-piece wheels may not have a brake drum or caliper diameter larger than 13 1/8". See Tech Specs page.
= See wheel on vehicle. =See photo comparison of wheel in different sizes.
All material contained in this website is copyright Team Three Wheels 1960 – . All rights are reserved.